Where To Buy Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

I recently used my sonicrafter while we were installing some bamboo floor, and this tool was a great sidekick. I used it for linoleum, copper tubing, removed tiles, trimmed door trims as well as edging the super hard strand bamboo for "spot fitting". it works as advertised.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Shop For Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

I agree 100% with most of the other posters as far as this tool is loud and after using for a short time your hands are tingling and hot.
They should have used a fine thread for the tool attachment so it would stay tight.
But it will do the jobs that no other tool can do when in a pinch.
eg. There was a rotted 2 X 4 that someone had used as an outside corner board then installing the siding with a rotted spot in the middle of it.
It cut straight into the board without having to remove the whole board and replacing.
My biggest customer is using it to remove grout and likes it.
We just used it to under cut the door jams when intalling tile in a bathroom. The tricky part was no other tool could have cut out half of the jam like I wanted it
Works great to cut holes in sheetrock for old constrution boxes.
I see where a lot of people were raving about the nice box there's came in. Mine came in a simple cloth bag.
As far as finding sand paper I just use my hook and loop paper that I already have and just cut it to fit.
I agree that vacuum pick up is a joke.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

Used this tool pretty hard and it has held up so far, and it did the job as advertised.......Rockwell RK5102K Sonicrafter Deluxe 72-pc KitGet more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Review

This product is ideal for plunge cuts and for cutting drywall. The attachments are expensive, so buy a kit with all of the attachments included.

I found that the screw that holds the blade can come loose at the highest speed (speed 6). However, the product worked great at speed 5. Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Top Quality

The tool works well to do what it says it will do.

I used it to trim the end of a fireplace mantle to make room for built-in bookshelves. I used a skill saw to cut as far as possible, then I was able to cut straight in to trim the rest of the wood up to the sheetrock.

It does not cut as smooth and fast as shown in infomercials, but that is not surprising.

The 72 piece kit is mostly sanding discs so if you are not going to do a lot of sanding don't bother paying the extra cost. Also, sanding is a self-destructive activity because the dust destroys tools. You are better off buying a cheap (more disposable) sander and saving the expensive Sonic Crafter for saw cutting.

The saw blades are expensive, and only four came in my 72 piece kit though the picture shows seven. For the few circumstance you need them I think the blades are worth the cost.

I am happy with my purchase.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit This instant

I BOUGHT THIS TOOL TO CUT A STRAIGHT EDGE TO REMOVE A SECTION OF OLD HORSE-HAIR PLASTER AND IT WORKED GREAT! IT IS ALSO A VERY SAFE TOOL.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Immediately

I used the Sonicrafter to do some jobs around the house. The sonicrafter works for me. It is good for cutting grout, scoring tile, cutting smaller pieces of wood (not plywood I found), etc. The attachments do tend to come loose during use. I've found that attaching the accessories firmly and then give an extra turn until you here a click will be tight enough. If you have heavy duty work, then I would use some heavy duty tools. Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Best Quality

I used this tool to cut both wood and drywall and it excelled at both. Like others have said, let the tool do the work for you. I was debating between this and the Fein, but decided to go with the sonicrafter based on reviews and price. I did not experience the screw loosening problems as others have found. It seems that if you make sure the blade is mounted properly before tightening, then you(at least I did not) will not have a problem. I did not cut any nails or sheet metal with it yet. I will say that this saw has no kickback or recoil and is a super safe and comfortable power tool to work with. The head does build up a lot of heat under continuous usage. All in all a great buy and I would recommend this tool.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Get it now!

So far so good.I havent really used it that much yet but the project I did use it on which was changing a water heater,it worked great.I cut the copper pipe in a very tight area where you couldnt get a saw into.Wish the blade changing had a quick release.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Buy Now

I bought it because I am installing new hardwood floors in an old house and need to retro-fit the mouldings and door trim. Not going to happen with this tool. To connect the attachments to the body you slip them on to a hex nut that is the same thickness of the blade itself. You then thread a screw into a metal bushing on top and tighten it down. This connection will come apart from the vibration of the motor without even touching a piece of wood. If you are lucky enough to get it started into the wood it is only seconds before you have to stop and tighten it again. I was afraid to really reef on it as it is the only screw and I didn't want to strip out the hex head. This same connection is used on all the parts, so it wouldn't even make a good sander.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Order Now

Wow, what a tool. I had to replace the old rusty baseboard registers and returns in my house that were over 50 years old, had ball and chain adjustors that were long gone or broken. Well the local Home Depot does not carry baseboard registers or returns, but Lowes does. So, when I get them home and try to install the first one, guess what, the new ones are about 1/2" wider than the old ones. How do I cut about 1/4" off the old, dry wood moldings without creating a big new job for myself? The Rockwell Sonicrafter to the rescue. Pencil marked the moldings with the new returns and used the "plunge" cut technique and in about 5 minutes I was done with the first one. I don't think a jigsaw would have worked as well or at all. A "zip" type tool may have worked, but would have created a lot of dust in the air. The Rockwell Sonicrafter was the perfect tool for this job. Now back to work and the rest of those registers and returns.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Decide Now

I've used the Fein Multimaster for a while now, but when shopping for one, the Rockwell Sonicrafter blows it away, if only for the price. When comparing the two, the blades are cheaper, so that's a plus. However, the locking mechanism for the blades is a hex nut and it looks like it can get worn easily. It's slightly heavier than the Fein, but all in all, a great buy. I've used mine for several projects so far and haven't even used 1/4 of the attachments... you'll start making up project before too long. Buy it now!Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Right now

this is a really good tool. it comes in handy for all kinds of things that would really be a struggle otherwise. i use mine to cut off toilet tank bolts, toilet seat bolts and all kinds of things in tight spaces. you can set thie angle just about anywhere! i only give it four stars because of the cost of blades. if they were cheaper it would be five starsGet more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Lowest Price Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

We saw the infomercial and my hubby said that he didn't need and wouldn't use it. I ordered it here (from Amazon) because I figured that, if he wouldn't use it, I would.

We do. We are not very knowledgeable when it comes to tools and home repair but it's really easy to figure out how to use this (which is a good thing because you don't get -or at least ours didn't come with- an instruction manual.)

We've had it a little over a month and I am surprised at how many times my husband has instructed me to, "Go get that thing you bought," when we are fumbling through a home repair project.

I like the idea that it's a safe tool to use, as it will only cut rigid objects (not fingers) so I'm not afraid to (let my hubby) use it.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Low Price Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

I received my Sonicrafter about a month ago and have used it on a couple of projects. My co-worker and I have made the same comment - "how did we get along without this tool." Very flexible and durable.

I say durable and then I must say that the on/off switch became intermittent. I called Rockwell and they are shipping me a complete new kit! No issues, no push back. They are sending a new one even before I return my old tool! I really appreciate a company with that kind of attitude. Things happen, tools break, so I will give them the benefit of the doubt as long as they have such a great support policy. Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Save Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

My project is removing moisture-compromised mortar from an 80 year old red brick basement. I have no running water leaks, just seepage through mortar and the flat nail holes used to attach the furring strips.

I tried hammer and chisel, carbide tipped drill bits and an angle grinder with these results: too hard, inadequate to the task, and effective, but far too dusty.

I looked for an oscillating tool. Fein, the macdaddy is, I think, designed for professionals and priced too high. The Dremel appears to have been made for light projects, not mine. The Bosch is battery operated and for this job I wanted electric power. That left the Rockwell. Bingo.

This sturdy tool met my expectations and more. Once I choose the correct blade, the tool tore through the compromised mortar raising only a minimal amount of dust.

A note about blades. I bought the 72 piece Sonicrafter and an extra grinding blade (circular with a flat side), to remove the mortar. I reduced that blade to a gritless nub in about 45 minutes. Next I tried the eliptical triangular carbide grit blade. Because the metal of this blade is stronger, it lasted somewhat longer. Then I mounted the scraper blade, the stoutest piece of metal in the box, with no grit at all. This proved to be the best blade for my job.

I do not know if this blade would be more effective than the carbide grinder blades on non-compromised mortar, all I know is it works like a charm on my job. Given this experience, I expect the perfect blade for strong grout and/or mortar would be a cold chisel blade, but no one offers that, yet.

A note on the blade mount. Several users have complained that the blade on oscilating tools tend to loosen. I have not found that to be a problem at all. Had I designed this tool, I would have used a stronger blade fastener than an allen head, but so far it has worked for me, and if you round out the allen, replacement screws are a few pennies.

Four stars and not five because I have used this tool for only this application.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Discount Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

I am happy with this tool. it works in some places that a rotary tool works but makes less dust mess. I like it to cut straight drywall cuts they come out clean enough to slide back in place and the piece will refit snugly (great for finding/fixing behind the wall and putting the cutout back in and repair easily). The flat thin vibrating attachments are great for making cuts when no access can be had by other tools without the hazards of a reciprocating tool blade. It can cut nails holding 2-2x4s face to face without damaging either board beyond usable.
I am looking forward to using the diamond tools on ceramic tile this week.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Cheapest Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

Why four stars instead of five? The blades need to be put on VERY CAREFULLY. They MUST be seated properly, or else they won't cut, and will begin to gouge their axle, which for all we know, might ruin the tool. Also, as it is made in China, we won't know for some time whether it is a quality tool. p.s. Tighten the hex drive screw very securely!

We do a lot of work on our apartments, but are not contractors. Here's what we love about the Sonicrafter. It does not get dust all over the place when cutting or sanding. The scraper is incredible. You really can make cuts right up to any surface. The sanders get into tight spots. The tool does NOT kick back. You can use it in a cramped space (like between a floor and the ceiling below it). you can easily make a shallow cut when there may be something behind your workpiece. You do not have to be strong to use it. It is quieter than a circular saw, a sabre saw, and a sander.

It will not replace your sabre saw, your circular saw, or sander. But it is great. The best instructions are on the online videos for both the Sonicrafter and the Fein oscillating tool.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Cheap Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

I've had my Sonicrafter for a couple of months and already I feel like I've gotten more than my money's worth out of it. It is a heavy-duty, professional quality tool and this set comes with about everything one needs to get started on any project. So far I have used all of the tool attachments except the rasping triangle, and so far so good.

A kitchen remodeling pressed the tool into heavy use, but the Sonicrafter was most impressive of all in removing loose paint from old crown molding and making the various surfaces smooth, ready for priming and painting. This latter job took me less than an hour -- it was in a large bathroom --with far better results than I would have imagined from tens of hours of hand scraping and sanding. Having pointed sanding tools operating with this much power speeds up detail work immensely.

I find the allen wrench "chuck" easy enough to use and have had saw blades slip only a couple of times when I got in a hurry.

I have yet to use the vacuum attachment -- I'll need to get a hose extension for my shop vac -- but it looks like a clever and effective set-up. But it's not an essential feature, since the tool is great even without it.

I shopped but did not demo the competing products. One was too expensive and the other seemed a little light weight.

I am thrilled with the Sonicrafter.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Buying Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

i ordered both items, and used both, the sonicraft does run hot as other's have mentioned, but that does not seem to cause any issues. it performs the tasks it is designed to do. get the full 72 piece so you get all the trimmings. So far I have used this for sanding, and for cutting 1/2inch and 3/4 galvanized pipes. both work fine. i have not experienced the parts coming lose during use. comparing the two, and since i expect to use this occasionally during the next year or so, this is a way better deal than the multimaster. If you are a contractor and expect to use this type of tool almost on a daily basis, I would say get the fein. if you are rennovating your home in your spare time, get the sonicraft, you'll be much happier with a 180 dollar tool sitting idle in the grarage, compared to a 400 dollar tool sitting idle!Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Buy Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

This power tool is very well built and solid. It does exactly what they say it does and I am extremely happy with it. Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Purchase Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

I debated a couple of years about purchasing a tool like this. At first, Fein was the only option and just for home use it was too much money for me to justify purchasing. Now that there are reasonably priced choices, I purchased the 37 piece Rockwell kit and added some accessories. Honestly, I felt like it was a gamble. Many reviews say the blades don't last and they come loose all the time. I rolled the dice. I WON!!!

This is a solid tool. I love working with tools and I own a lot of professional quality tools. I put this in the same class as my Bosch, Dewalt, Porter Cable, Rigid, and Makita tools.

For $208 I bought the 37 piece kit and a diamond segment saw, a carbide triangle saw, and a blade cleaner. (the 37 piece kit is the cheapest with variable speed; the least expensive kit is not variable speed). The harder the material you work on, the higher the speed needs to be set. According to the manufacturer, it is running the tool on too low a speed that causes overheating and excessive blade wear. The tool and add on accessories cost me less than half as much as the equivalent from Fein would have.

I immediately went to work taking out thinset from an old tile job, probably 1/4 inch trowelled. I had tried hammer and chisel and hated that. I bought an angle grinder which worked but threw dust everywhere. That lasted about one minute before I had to quit because of the dust. Then I threw a rug over it. That was a couple of years ago.

This Sonicrafter with the diamond segment saw is the right tool for the job. It is powerful enough. I used it for an hour, it did not overheat or bog down. The blade shows no signs of wear. The blade never came loose. It did not throw dust everywhere. After an hour my hand was tired. Operating this tool feels very much like operating a random orbital sander. The gentle vibration over time is fatiguing.

Be careful when you mount the blade. Blades mount like a twelve point socket fits on a nut; but these blades and mount are thin like a hacksaw blade. Make sure the blade is seated on the nut before you tighten the mounting screw. If the blade is mounted correctly, it will not work loose. I have used three different types of blades and have never had a blade work loose. Just get it on there right to begin with.

I am more than satisfied with my choice of Sonicrafter over Multimaster. I used some of the money I saved to buy myself a new Stetson hat.
Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Order Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

Rockwell RK5102K Sonicrafter Deluxe 72-pc Kit
I originally wanted to by the Fein all-in-one. I was a little hesitant to buy the Rockwell Sonicrafter but thought, I'll take a chance, the price was right. You can tell how well built this tool is as soon as you hold it in your hands and even more so when you turn it on. Soon after purchase we did a window and door frame "rebuild job" and found many uses for the Sonicrafter. I challenge anyone to remove elastomeric caulk from a steal door or from a pressure treated sill plate without damaging it, we did so with the scraper blade and left little or no marks, I was surprised how well it removed the caulk and how clean it left the surface. On that same job we needed to remove stucco from each side of the openings with out damaging the stucco outside of the jamb area, [we did not want to have a stucco repair], we used the Triangular Carbide Rasping tool and a vacuum to keep the dust to a minimum, normally we would have used a hammer and chisel which would have taken a couple hours, we were done in less than 30 minutes. Again I was very surprised at how well the Sonicrafter worked. I have also used it to, plunge cut base molding and other flat surfaces with extremely accurate cutting results. The Deluxe 72-pc Kit was worth every penny. The variable speed comes in very handy for different job applications. I have yet to find a job that we would not use this tool for. The oscillating action cuts, sands, scrapes and works amazingly well. It is a ideal tool for any one who works doing any type of remodeling.
PS, Every one who has purchased tools to use on their job site everyday to make a living knows, "you don't buy junk" and that some parts will where out ie; screws and bolts "used frequently" to hold cutting blades in place. The manufacture has thought to give you an extra "Allen screw" to hold the attachments to the tool, VERY NICE! Thank You Rockwell.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Where To Buy Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

I bought the SonicCrafter to trim a door, I have used it to cut the fastest hinge mortises ever. It leaves a smooth finish and is easy to control.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Shop For Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

I am doing renovations in my condo. Like many vintage places, paint was layered on paint since 1929. I am in the process of stripping the many many layers of paint off the woodwork. I purchased the Rockwell Sonicrafter for the mouldings and to remove the paint which is not removed by normal scrapers. I received it today and reviewed the warnings. There really are not instructions included. I first gave the scraper a try. Although it scraped well, because of the design of the attachment, I had to tighten the attachement 3 times in 10 minutes. It kept coming loose. I had to tighten it so tight that I was afraid the I would soon strip the bolt. It still came loose.

Next I tried the finger sander on some molding. The sandpaper fits on the finger attachment using something similar to velcro. This was secure. I used the finger sander for just over 2 minutes on various moulding surfaces and began to smell something. I looked and the top part of the finger sander attachment had melted. It was then that I decided that the Sonicrafter would not work for me and arranged to return it.

As I stated, the tool itself feels like it is solidly built. The design for securing attachments and the attachments themselves are what have the major flaws. Do not purchase for anything but light work.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

Like many others I read all the reviews for this tool and was debating whether or not to purchase this or the Fein tool. I am a contractor that cuts out and installs decorative glass into customers existing doors and sidelites. The Rockwell seemed to be the best among the Fein competitors so I took a chance because of the large price difference and so far am very pleased with my selection. The tool worked perfectly for cutting out steel and fiberglass sidelites. I used the Universal End Cut blade and was suprised how well it cut. I did not have any problems with the blade coming loose as some reviews have stated. I bought this tool specifically to cut out side lites since there is usually not room for a jig saw to manuever and a saws-all is too hard to handle and does not leave a nice clean edge. With this tool I was able to plunge cut without drilling a pilot hole and make perfect square corners with ease. It saves me time on installations and really turns out to be the perfect tool for the job. The Sonicrafter is well built and I plan on using it for a long time.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Review

I read such great reviews I was very excited to get my new tool. I used the tool intermittently for about 30 mins on a wood cutting project and turned it off. I went back to work on my project and the tool would no longer turn on. :( Maybe I got a lemon?Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Top Quality

The sonicrafter works great on plaster walls.I cut a nice clean hole for an electrical box without any wall damage.In the 72-pc kit,there should have more variety of cutting tools.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit This instant

The first tool I received wouldn't even turn on, but the second was fine. It just raises questions about quality control and longevity. Amazon was A+++ on replacing it.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Immediately

Rockwell RK5102K Sonicrafter Deluxe 72-pc Kit

This one set of tools has saved me time and money!Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Best Quality

This product was exactly as advertised. I look forward to using it quite a lot to assist with the remodeling projects I will be doing.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe

Buy Rockwell RK5102K Sonicrafter Deluxe Lowest Price, Order Now! [Click Here!]
Rockwell-RK5102K-Sonicrafter-Deluxe

Why buy "Rockwell RK5102K Sonicrafter Deluxe"?
You Save On "Rockwell RK5102K Sonicrafter Deluxe" You can Buy Rockwell RK5102K Sonicrafter Deluxe In Stock. Low Prices on Rockwell RK5102K Sonicrafter Deluxe Shops & Purchase Online - Quick & Easy.
Discount "Buy Rockwell RK5102K Sonicrafter Deluxe" Free Next Day Delivery & Pay No Sales Tax! You can Buy Rockwell RK5102K Sonicrafter Deluxe In Stock. Low Prices on Rockwell RK5102K Sonicrafter Deluxe. Shops & Purchase Online - Quick & Easy.
Buy Rockwell RK5102K Sonicrafter Deluxe Lowest Price, Order Now! [Click Here!]

Relate Products
WORX GT WG151.5 Cordless String Trimmer Edger, Sunforce 44444, Rockwell RK5102K Sonicrafter Deluxe, Makita LCT203W,
Tag
Prefix:
Buy Rockwell RK5102K Sonicrafter Deluxe,Buying Rockwell RK5102K Sonicrafter Deluxe,Cheap Rockwell RK5102K Sonicrafter Deluxe,Cheapest Rockwell RK5102K Sonicrafter Deluxe,Discount Rockwell RK5102K Sonicrafter Deluxe,Save Rockwell RK5102K Sonicrafter Deluxe,Low Price Rockwell RK5102K Sonicrafter Deluxe,Lowest Price Rockwell RK5102K Sonicrafter Deluxe,Shop For Rockwell RK5102K Sonicrafter Deluxe,Where To Buy Rockwell RK5102K Sonicrafter Deluxe,Order Rockwell RK5102K Sonicrafter Deluxe,Purchase Rockwell RK5102K Sonicrafter Deluxe,
Suffix:
Rockwell RK5102K Sonicrafter Deluxe Right now,Rockwell RK5102K Sonicrafter Deluxe Decide Now,Rockwell RK5102K Sonicrafter Deluxe Order Now,Rockwell RK5102K Sonicrafter Deluxe Buy Now,Rockwell RK5102K Sonicrafter Deluxe Get it now!,Rockwell RK5102K Sonicrafter Deluxe Best Quality,Rockwell RK5102K Sonicrafter Deluxe Immediately,Rockwell RK5102K Sonicrafter Deluxe This instant,Rockwell RK5102K Sonicrafter Deluxe Top Quality,Rockwell RK5102K Sonicrafter Deluxe Review,

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Get it now!

the sonicrafter is a great multi tool it is good for small jobs. iam very pleased with its performance thus far I have cut sheet rock spot sanded parts of my wood floor it leaves a clean smooth look to corners I can get in places I could not reach with my belt sander. My only grip is the tool attachments wear out too quickly, I melted the sanding velcro attachment head for the sonicrafter but I will order a new one. the prices a little high for some of the repacement attachment parts. but fein is the same way. when I cut into grout the tool did what it was advertised to do, it just takes time, all in all Im very happy with the sonicrafter thus far. I will engage in some wood cutting soon to see if this tool is up to the task. All in all I do like the tool it is outstanding for precision cutting and working in small spaces. just wish the attachments lasted longer. make sure to tightent the attachments to the tool or you'll get a bad vibration when powering up the tool, and wear the attachment heads where they are conneted to the tool itself. The sonicrafter will be fine just the attchement will get worn. ITs a good purchase for the money you pay. the 72 piece kit is really good, a lot of sand paper attachments I like how the velcro is used to hold the sand paper to the attachment. great tool just take breaks between 2 hourly uses.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Buy Now

I am very happy for my new tool. I got a lot of great use out of it as soon as I received it. It cut through things like butter. and with so much ease. My only problems are that I was not able to use the suction device when using all the attachments, such as, the universal saw blade. I was not too happy when I used the grout cutting bit. The bit was only good for one use.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Order Now

A great tool to have in the tool box!!! Allows me to get into places with a saw that no other tool did. Used it right out of the box and saved me from the pain of trying to cut out molding by hand. Will know it is there for the tight workspaces.

Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Decide Now

I am pleased that I purchased the Rockwell Sonicrafter instead of the more expensive brands. It performs well. The only complaint I have is that the blades wear out too quickly.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Right now

I've used this tool for three things (so far):

1) Plunge cutting drywall. Works great with a semi-circular general purpose blade. Cuts a pretty clean straight line, and is not at all hard to eyeball a straight and level cut either. Does not cut like a hot knife through butter, you need patience. It cuts smoothly.

2) Plunge cutting wood. I need to cut a notch out of a piece of fence located in an awkward area next to the wall of my house. I was able to lean in with this tool and the straight blade cocked over at a 45 degree angle and cut right through. Once again, it cuts smoothly, but not like a hot knife through butter and I didn't try jamming on it with a lot of pressure.

3) Grinding out old grout from bath wall tile. The walls have undergone settling and the corner grout has cracked and separated. I tried using the semi-circular grinder instead of a hammer and chisel. I ground out quite a bit, but this was slow. Also the thickness of the grout was such that the tool ground a thin line through it. In the end, I used a hammer and chisel to do most of the work.

I haven't use the scrapper blade or the sanding pads for anything yet. I feel like this tool will be mostly useful for odd situations or modifying something that is already built like drywall, framing, fences, etc.

You need to torque down the screw that holds the blade on extremely tightly. It comes with a spare screw in case you strip it. I feel like the mask could have been a little deeper to give the blades more clutch or grip to the tool, then the screw wouldn't have to be so tight to keep the blades from slipping. If you do not tighten the retention screw enough, the blades will slip with just a little lateral pressure.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Lowest Price Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

My wife and I just bought a home and I'm renovating the entire thing. Although I have many tools to get the job done, I saw the infomercial for the Fein Multimaster and was intrigued. The Fein was cost prohibitive, so I sterted looking for options and ran across the Rockwell. I've only had the oportunity to use it twice (once for cutting, once for sanding) and wasn't impressed. I cut a piece of base moulding to make room for a cabinet and the blade dulled about a half inch into it. Sanding proved to be better. I needed to sand a small area on a cabinet door I'd made and the Rockwell did a great job with out much vibration. Overall, I think the tool has a place, but I would say don't buy into the hype of a wonder multi-purpose tool. I've got other projects lined up and will attempt to use the Rockwell, but have my regular tools ready in case the Rockwell fails at them.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Low Price Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

The Sonicrafter does a great job. Have not had a problem with it at all.
It is a high speed tool, and as with any high speed tool, make sure the attachments are fastened correctly and tightly. I would recommend this tool for a great job.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Save Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

Bought this tool for personal use both at home and on mission trips working on flood, hurricane, and tornado damaged homes. First use was on a flood damaged home in Cedar Rapids, IA, and it was used constantly for a variety of tasks: cutting drywall, trimming wood, sanding drywall, cutting PVC pipe and wood trim, and cutting nails and screws. It worked fantastically on the first four of these tasks. It worked well on cutting thin nails and screws, but I think I need a tougher blade for the thicker nails. It was also dropped from a fairly good height onto concrete with no apparent damage, so it seems very sturdy.

I would certainly recommend this tool for general purpose home repair.

Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Discount Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

I am doing a construction project and have to do several cut outs through 3/4" plywood. I had a little trouble getting the correct settings but after reading the owner's guide (which really needs some work, it is very poorly done), I was able to figure things out. The big thing to learn is to not push too hard and let the blade do the work. Although it is slower than using the jigsaw, the cuts are much cleaner and it is easier to cut a straight line. The other attachments are excellent, the scraper is great at removing old thin set, adhesive, and other things from concrete. The detail sander works great.

I did have problems with blades working loose at first, but once I learned the proper speed setting for each application and listened for the click of the blade setting in place, that problem disappeared. This is a tremendous value compared to Fein and I would not even consider the Dremel, it feels like a toy compared to this.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Cheapest Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

I've had the Sonicrafter a couple of months now, and if it died tomorrow, it will have paid for itself with all the work I have done with it. Best tool I have ever owned. It will get into places where other saws/cutters won't and make a cleaner cut. I haven't used it for sanding, scraping or polishing yet, just cutting wood and nails. When you use it, you can't force it, just let it go at it's own pace and guide it back and forth. I highly recommend it.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Cheap Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

This tool outperforms so many similar models. It eliminates a lot of time fitting, cutting, switching out tools. It's versatile, not too heavy and as far as I can see after owning it for almost a year is that it isn't cordless.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Buying Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

I first came across the Fein Multitool on a TV infomercial. The price sort of stalled me on that one in spite of the fact that Fien makes top-drawer industrial tools w/typical ***** German engineering.
Several months later I stumbled onto a (brand NEW) Rockwell-Sonicrafter Ad and started searching for info. Didn't take long to find them on scores of websites including Amazon, from whom I'd bought before. Good outfit.

Reading (then) only a half dozen or so reviews on Amazon I knew I'd be more satisfied with the bigger, sturdier Rockwell over the other few light-weights around like the Dremel. I ordered the mid-range ($139.xx) Sonicrafter package.

Turned On or Off this tool has a solid feel, (and sound). It is smooth, quiet and strong. It's (comparatively) large 2.3 amp motor has plenty of muscle. My first need was when I had a 40gal. water heater hemorhage at 11 pm.
Next day I bought a tankless heater - which required a good bit of re-plumbing and cutting a hole larger under the "bottom" of a charged 3/4" PVC waterline in a nightmare place. An otherwise 2 hr. job draining and removing waterlines just to get back to the hole that needed lowering was surgically completed in about 5 minutes with the brand new Sonicrafter. As far as I am concerned this tool had just 'Paid' for itself first time out of the box.

A few tips. #1. Like most cutting tools including power drills, these new Multi tools (by whatever trade name) can not be "pushed" into cutting substantially faster. But, "Leaning" too hard on these tools 'will' do some things you're not going to like; Such as prematurely burning up or dulling cutter blades - overheating the motors - and, if you hear someone complain about the hub screw regularly loosening on a Sonicrafter you can bet that they are seriously 'dogging' down on that tool to make it happen.
The one I chose has the variable speed control - I expect the lower speeds might be handy only for 'sanding' stuff like 'less hard' finishes, aka old varnish. For hard, brittle material 'cutting' use a very high or highest speed... And no different than with any saw-type tool for cutting - your material must be held firmly 'still'. If not, you're just going to be "viberating" your work piece instead of cutting it.

I rate this tool as being a Real Winner among my 'manly' treasure chests of hand-&-power tools! ;-)


Whack on,


Gerry Harris
Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Buy Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

This tool allows me to make cuts in tight spaces like no other tool. I have managed to do repairs with this so much more easily. In some cases I would have been using a wood chisel...with this tool I got a quick clean cut. This tool opens up a whole new world of possibilities when it comes to approaching a repair/remodel.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Purchase Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

I've seen ads for other products and the lower cost ones didn't impress me. I just finished extracting some window casing around built in cabinets. It was more of an operations then demolition. The tool is quite compared to an older vibrating sander I had. The feel is quality.
It cut nicely in wood with the combo blade. The sanders are aggressive. Dust was not a issue, just falls in place. So I just ordered wood blades. The only negative is the screw for changing tools. I'm careful to insert the allen wrench all the way and not strip it.
The head gets hot but I don't hold the head. Not tiring on the hand. Did not loosen as some report. Feed is slow as expected. All in all It's a tool I will use with it little doctor bag.
Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Order Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

I just received the Sonicrafter and put it to use removing grout from floor tile. The carbide blade that came with the kit worked very well but like others have said it wears quickly. You must remember what you are cutting. Tile grout is a very hard and course material and a thin blade like this will wear quickly. I am not disapointed. I am a professional and do like good quality tools and this is one of them. In other reviews I have seen disapointment in the 'hum' of the tool, what do you expect from a tool that is working for you. The best thing about this tool and others like it is that it does not make dust that is uncontrolable.

As for those who are having trouble with the blades coming loose, you must take care, like most tools, in mounting the blades and get it in the groves and tight. What do those with the problem of the thin blades think, it is better to have a well built tool with precision cutting than a hand grinder. I could have used that tool, which I have several, but watch out for the dust.

As for the carbide blades that comes with the tool, the cutting material is on the side of the blade and you should attempt to use that part of the blade as much as possible. Just working it in against the edge will wear that part of the blade quicker. If you choose to go the the diamond blade, which I am going to do, you will exerience the same problem of wearing the blade if you do not use the cutting surface as much as possible.

The tool has a very good feel and the switch is better than some of my other tools with a simular switch. The cord has a good length but when I am all over the floor I use an extension in addition. I rated it a 5 star because I have not found any flaws and if treated with respect it should last a quite a while. Some have complained because it does not have a quick-release rather than an allen head screw. Just think of how much room a quick-release would take up. It is best to have a tool that fits in close to the work.

I feel strong about Bosch tools and considered the cordless one that Bosch makes but I went this route to get an uninterupted use hearing that the batteries only lasted a short time. I considered the Fein Multimaster but could not justify the cost and I don't know how it would be that much better. Don't look at the number of pieces in the kit, most of it is sanding pads. Not knowing how you are going to use the tool they put a little of most things in the kit. You can determine how many of the blades, etc. you will need.

I read reports where some complained about the bag the came with the tool rather that a hard case. I haven't had hinges or latches break off my bags like I have with the hard cases.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Where To Buy Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

Not only is this item a piece of junk, but I had made several calls and sent many e-mails to rockwell. They do not return calls, they do not answer the phones. And they DO NOT answwr your e-mails as they promise. Don't waste your money. Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Shop For Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit

One of the guys at work purchased this tool and I just had to try it! He loaned it to me for a weekend, and it only took a few minutes to plunge cut several Cumaru deck boards. (Cumaru is much harder than most woods you'll find in any home, on par with Ipe.) Anyway, I didn't find any trouble with the blade coming loose. I tightened it up and that was it. I did notice it cut this wood better at a slower speed. Maybe that's why other negative reviewer were having problems: running too fast. I would buy this took if I had more uses for it, but for now I think I'll borrow it and buy him a blade or two. :)Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.

Hi Welcome to Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Reviews Blog!

Hello! Welcome to this Blog. I Created for Many Reviews of Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit Around the internet.
I hope you could read it before you decide to buy Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit
Enjoy Reading!