Rockwell RK5102K Sonicrafter Deluxe 72-pc Kit
I originally wanted to by the Fein all-in-one. I was a little hesitant to buy the Rockwell Sonicrafter but thought, I'll take a chance, the price was right. You can tell how well built this tool is as soon as you hold it in your hands and even more so when you turn it on. Soon after purchase we did a window and door frame "rebuild job" and found many uses for the Sonicrafter. I challenge anyone to remove elastomeric caulk from a steal door or from a pressure treated sill plate without damaging it, we did so with the scraper blade and left little or no marks, I was surprised how well it removed the caulk and how clean it left the surface. On that same job we needed to remove stucco from each side of the openings with out damaging the stucco outside of the jamb area, [we did not want to have a stucco repair], we used the Triangular Carbide Rasping tool and a vacuum to keep the dust to a minimum, normally we would have used a hammer and chisel which would have taken a couple hours, we were done in less than 30 minutes. Again I was very surprised at how well the Sonicrafter worked. I have also used it to, plunge cut base molding and other flat surfaces with extremely accurate cutting results. The Deluxe 72-pc Kit was worth every penny. The variable speed comes in very handy for different job applications. I have yet to find a job that we would not use this tool for. The oscillating action cuts, sands, scrapes and works amazingly well. It is a ideal tool for any one who works doing any type of remodeling.
PS, Every one who has purchased tools to use on their job site everyday to make a living knows, "you don't buy junk" and that some parts will where out ie; screws and bolts "used frequently" to hold cutting blades in place. The manufacture has thought to give you an extra "Allen screw" to hold the attachments to the tool, VERY NICE! Thank You Rockwell.Get more detail about Rockwell RK5102K Sonicrafter Deluxe 72-Piece Kit.
No comments:
Post a Comment